Sunday, 26 November 2017

GLOSSARY OF ARCHITECTURE TERMINOLOGY

ABACUS:                       A slab forming the crowning member of the capital.

ABUTMENT:                   Solid masonry which resist the lateral pressure of the  arch.

AGORA:                          The Greek equipment of the roman forum, a place of open air assembly or market place.

AMPHETHEATRE:          The circular structure characterized by rising tier of stone seats contained within an arched stone outer wall that was used by Romans for circus performance and gladiatorial contest.

ARCHADE:                      A series of arches supported by piers or column or roof passageway or a lane.

ARCH:                            A structure of welded shape bricks over an opening , so disposed as to hold together when supported only by one side.

ARCHITRAVE:               The beam or lowest division of entablature which extend  from column. Also the moulded frame round a window or door-frame.

ASHLAR MASONARY : Masonry construction using a square stone.

ATTIC :                             Upper storey of a building above the main cornice, also the rooms in a Roof.

BALCONY:                        A platform projecting from an upper story and enclosed by a railing.

BALUSTER :                       A pillar or column supporting a handrail or coping, a series forming a balustrade.

BANDING:                          Horizontal subdivision of the column or wall using a change in profile Or change in material.

BASEMENT:                      The lowest stage of the building , usually an underground storey.

BASE:                                  The lowest part of the structure.

BAY:                                    The principal division of an interior of exterior elevation.

BAY WINDOW:                 A set of two or more window that protrude out from the wall. The window is moved away from the wall.

BEAM:                                Horizontal load bearing member of structure of building framework.

BELL ROOF:                       A roof whose cross section is shaped like a well.

BOARD FEET:                    A unit of measurement based on volume. 144 cubic  inches of the wood equals one board feet.

BOND:                                 A term adopted to describe the various pattern used to lay bricks in order to give a maximum strength. For example English bond , Flemish bond etc.

BUILDING CODE:              A set of law drafted by the governing body of a borough, town or city to control building construction “ to promote the public health safety and general welfare” of the people in that locality.

BUTTRESS:                        A projection of masonry or a brick work frame to give additional strength to the wall.

CANOPY:                           A projection or a hood over the door, window, niche, etc.

CAPITAL:                           The elaboration at the top of a column, pillar, pier or a pilaster.
 
CANTELEVER:                  Part of beam or a floor which projects beyond his  
                                          supports.
CASEMENT WINDOW: A window that opens by swinging inwards or outward much like door. Casement windows are usually vertical in shape but are often grouped in a band.

CHAITY:                          A Buddhist meeting hall.

CHATRI:                          A domed pavilion supported by columns at each corner, which is characteristic element of mugal architecture in India.

CHIMNEY:                      A passage of structure extending above the roof, through which smokes escapes.

CLADDING:                    The light weight outer skin of the building that does not carry any weight or support the building , but does keep the wind and rain out. A term used to describe the siding or materials covering the exterior of the building.

CLERESTORY WINDOW:A window (usually narrow) placed in the upper wall of the room, usually at a angle, to provide extra light.

COFFERS:                        Used for and aesthetic purpose enabling column free large span structure.

COLONADE:                    A row of column forming an element of an architectural composition, carrying a flat-topped entablature or an row of arches.

COLUMN:                       A vertical structural support support of a building carrying a compression load.

COPING:                         A flat cover of stone or brick that protect the top of the wall from rain.

CORNICE:                        Cornice is the decorative band of moulding that round the wall of the room, just bellow the ceiling.

COURSE:                         A continuous raw of building materials, such as single brick or stone.

CURTAIL WALL:              In older times, it was a fortified wall of castle.    Nowadays, a non-structural or non-load bearing wall either of glass or reinforced plastic.

DUCT:                             A sheet metal enclosure carrying a warm or a cool air from a forced air heating or cooling plant.

EAVES:                             Lowermost edge of the roof, sloping, or otherwise, generally employed where roof over hangs sides of the building.

ELEVATION:                   Any vertical face of the building be it exterior or interior or a drawing of the same.

ENGLISH BOND:            Brickwork pattern with alternate course of header and stretchers.

FACADE:                         The front face of the elevation of a building or any structure, which can also be sculpted.

FANLIGHT:                     A semi-circular or semi elliptical window with a horizontal sill often above the door.

FLYING BUTTRESS:       A detached pier supporting the weight of a building.

FOUNDATION:             Sub structure on which the building stands.

FRESCO:                         It is the art of decorative or painting on walls by application of pure pigments dissolved in the water on the wall plaster.

FRIEZE:                            A band with deigns or a carvings along a wall or above doorways and window.

GABLE:                            A triangular area of an exterior wall formed by two sloping roofs.

GARBHA GRIHA:            The small unlit shrine of Hindu temple.

GOPURAM:                    A gate tower of Hindu temple, ornate, pyramid shaped, and sometimes very large.
 
GUTTER:                         A metal or plastic through along the edge of a roof that collects water off eave and carries it to the downspout.

HEADER:                         Short side of the brick faces out.

HIPPED ROOF:              A roof which slopes on the four sides. The “hipes” are the line formed when the slopes meets at the corner.

JAMB:                             The vertical member of the window or a door frame

KEYSTONE:                   The central, topmost stone of the an arch which     
                                        tight  the All stone of the arches.

LINTEL:                           A horizontal beam like a structure that span an opening such as door and window.

LOUVER VENT:             An opening fitted with a series of sloping slats arranged to admit light and air but shed rain.

MEZZANINE:                  Strictly speaking it is the leave or floor between the ground floor and first floor.

MODULE:                      A measure of the proportion adopted for a building on which all other dimension are based. In other words a basic unit from which other part of building are derived.

MOULDING:                 Shape decorative outlines on projecting cornices and
                                       members in wood and stone.

MULLION:                    The vertical member separating the adjacent window.

NECROPOLIS:                A burial ground.

NICHE:                           A recess of wall to place various decorations.

OBELINK:                      An Egyptian monument with a tall, tapering shaft of stone with a pyramidal top.

PARAPET:                     Portion of the wall that extend above the roof (wall surrounding the flat roof).

PARTITION:                 The name gives to the interior wall. Simply the wall separate the room from another room.

PIAZZA/PLAZA:            An open public square.

PIER:                              A vertical, non-circular masonry support, more massive than a column.

PILASTER:                      A rectangular vertical member projecting only slightly from a wall, with abase and a capital as with a column.

PILLAR:                          Similar to pier but more slender than it, it also non-circular.


PITCH:                            The rate at which a roof or the other surface slopes.
 
PLAN:                             A plan simply a two-dimensional drawing of the size and a shape of a space usually with dimensions. It is an orthographic projection, usually top view of an object.

PODIUM:                       A raised platform derives from the poda for feet, also the platform on which building is constructed.

PORTICO:                      It is an entry porch or vestibule supported by columns.

QUION:                         A stone or a block reinforcing or accenting the corners of a building.

RENDERING:                The art or a various technique are used to make a drawing as realistic as possible or sometimes to make their art non-realistic as well in order to express their work effectively.

RIDGE:                           The top-most portion of the roof from which sides fall away.

RISE:                               The vertical distance from one stair tread to the next..


RISER:                            The vertical portion of a step.

ROSE WINDOW:          Decorative circular window.

RUBBLE:                         Masonry construction using stones of irregular shapes and size.
 
SECTION:                       it is representation of a solid object or a building as it would appear if cut by an intersecting plane, so that the internal configuration is clearly visible making it easier to read the drawing.

SHIKHARA:                    A spire like structure , conical or pyramidal in shape, erected above the shrines of Hindu temple.

SHINGLES:                     These are the wooden or clay tiles used for covering roof or cladding of walls.

SHUTTER:                       A movable cover of window used for protection from  weather and intruders.

SILL:                                 A horizontal piece forming a bottom frame of the window or door opening.

SKYLIGHT:                      A window on the roof to provide light to a loft or a room without other lighting.

SKIRTING:                     Protective tiling to on vertical plane at base of the  wall to protect wall from water while cleaning the floor.

STAMBHAS:                Free standing monumental pillars, characteristic of Buddhist architecture.

STILE:                          The vertical side of window sash.

STOREY:                     A horizontal division of building, from floor to the ceiling above it.

STRECHER:                 Long side of the brick faces out.

STUPA:                       Hemispherical structure of Buddhism, used for keeping relics or belonging of Buddhist teacher.

TERRAZO:                 A colorful flooring material made of cement and marble  chips or stones. After the floor hardened it is ground and polished to smooth and durable finish.

TOUNGH AND GROOVE:A type of wooden siding with the edge of other board fitting into the groove of the next:

TRANSOME:             The horizontal member separating adjacent window.

TREAD:                      The horizontal portion of step, on which feet lies to accent for next one.

TRUSS:                       A framework for supporting a roof. they are structural member to support the roof usually made in steel or wood.

VASTUSHASTRA:     Traditional Hindu system of Architecture.

VAULT:                      An arched covering/ a series of arches one behind the other.

VIHARA:                   A Buddhist monastery.

VERNACULAR:        Style or type of architecture or design philosophy peculiar to the culture or race or locality.

WASTE PIPE:           The name generally applied to all household drainage pipe.












Your Personal Architecture Assistant

Featured post

Which 3D software is good for architects and interior desinger?

  Introduction to Architectural 3D Modeling Software by Suraj Gupta

Popular Posts